Fusion SystemsFusion Systems
About UsContactRequest For QuoteFusion Systems
Hot Splice MaterialsAdhesives / SolventsLining MaterialsLagging MaterialsConveyor RepairBelt CleaningSkirtboardToolsConveyor Belts / BeltingVulcanizing PressesDistributor OpportunitiesConveyor Belts / Belting1-800-977-5423Fusion Systems
PrimeDrive Lagging
Utilizing aircraft grade aluminum cores in a flexible wing design and fastened with self-tapping corrosion resistant bolts. PrimeDrive is the most unique lagging offering in years. It completely eliminates the grinding and cutting required to remove lagging that has corroded after months of use. It can be easily fastened with a pneumatic drill and socket driver, avoiding the use of burn permits and the risk of fire or explosion. Change-outs can be accomplished in 2-3 hours because the hole pattern already exists!

Description
PrimeDrive represents performance increases of 200 to 300% in wear life over Slide Lagg™ because the rubber compound has a high percentage of natural rubber. PrimeDrive provides superior traction, not only because of the natural rubber but because there are not gaps in the lagging. There is at least 16% more lagging in contact with the belt at all times. Without gaps between the strips there are also no flat spots which can lead to chattering when using high tension belt cleaners.

Applications
PrimeDrive can be used to 10" to 72" diameter and on any face width, therefore a few pieces will cover all the pulleys you have in your operation. There is not need to inventory numerous pieces with varying radius. With a chop saw, T-square and drill you have all the equipment necessary to eliminate that ole rusted-on lagging.

Properties
Elastomer 70%Natural 30%SBR
Tensile Strength 3,500psi DIN 53504
Elongation 600% DIN 53504
Density 1.13 g/cm3 DIN 53505
Hardness 65 Shore A DIN 53505
Abrasion Resistance 50mm3 DIN 53516
thickness/Guage
Width
Length
Weight
Request
Product Code
Description
frac
in
mm
in
mm
in
mm
lbs
kg
For Quote
Diamond Profile
PD-ST-96 Prime Drive Lagging
5/8
0.63
3
6
152
8
3.8
18
8
Fasteners & Tools
Diameter
in
mm
PR-BT-001 Zinc Plated Thread Forming Bolt
5/16
0.31
15
1.5
38
PR-DB-K Drill Bits
K
0.28
7.1
PR-DB-L Drill Bits
L
0.29
7.3
PR-CS-01 Counter Sink
5/8
PR-PS-01 Philips Drive #4

©2003 Fusion Systems, Incorporated. All Rights Reserved.