|Manufactured in Aluminum or Steel, the design has been thoroughly evaluated to obtain the maximum strength with the minimum weight.
Composed of 10" (250mm) wide elements, we obtain the required splice lengths by joining as many elements as required. This provides greater portability and easy set-up
Our presses allow you to select a maximum pressure of 70 PSI (5Kg/sq. cm) to 170 PSI (12Kg/sq. cm).The pressure is evenly distributed over the splice area by air bags or hydraulic pistons.
By means of a replaceable electric heating element, you obtain an even temperature over the platen surface. The element design specifically prevents concentration of heat in the center, and loss of heat at the ends of the platens, while the cooling system design allows a rapid cool-down of the press.
The electric control box is designed to withstand the most severe outdoor conditions, and control the entire vulcanization process. One control box can handle up to FOUR elements.
Our presses can be manufactured for 220V Single Phase or 440V 3 Phase operation.