Fusion SystemsFusion Systems
About UsContactRequest For QuoteFusion Systems
Hot Splice MaterialsAdhesives / SolventsLining MaterialsLagging MaterialsConveyor RepairBelt CleaningSkirtboardToolsConveyor Belts / BeltingVulcanizing PressesDistributor OpportunitiesConveyor Belts / Belting1-800-977-5423Fusion Systems
AC-25
The AC-25 is manufactured in tempered steel and designed for field service requirements. This press does not require air pressure or water for cooling. Pressure of 100PSI is achieved through hydraulic pistons, and the cooling process is made possible by fans located in the upper section of each element. Each element is 10" (250mm) wide and can be joined together in a parallel manner to achieve the desired splice length.

This press has a temperature range up to 482° F, and is programmed via the control box.

The AC-25 is available with a Rectangular construction, or on a 22^ Angle. Manufacturing is available in 220V Single Phase or 440V 3 Phase specifications.

Heating
Plate
Max Belt
Width
WIGHT (Kg)
K7 – 7 bar (100 PSI)
K12 – 12 bar (170 PSI) WE
Height
Upper
Part
Height
Lower
Part
Request
Product Code
in
in
K7 / K12
Upper
K7 / K12
Under
K7 / K12
Total
in
in
For Quote
AC-25 600
31” x 10”
24”
30 / 36
41 / 49
71 / 85
7,1”
7,9”
AC-25 800
40” x 10”
32”
41 / 55
56 / 71
97 / 126
7,1”
7,9”
AC-25 1000
48” x 10”
40”
50 / 67
58 / 90
108 / 157
7,1”
7,9”
AC-25 1200
56” x 10”
48”
62 / 75
80 / 100
142 / 175
7,1”
7,9”
AC-25 1400
64” x 10”
56”
88 / 106
106 / 146
194 / 252
7,9”
8,7”
AC-25 1600
72” x 10”
64”
96 / 120
136 / 170
232 / 290
7,9”
8,7”
AC-25 1800
80” x 10”
72”
117 / 147
146 / 183
263 / 330
9,5”
9,5”
©2003 Fusion Systems, Incorporated. All Rights Reserved.