Fusion SystemsFusion Systems
About UsContactRequest For QuoteFusion Systems
Hot Splice MaterialsAdhesives / SolventsLining MaterialsLagging MaterialsConveyor RepairBelt CleaningSkirtboardToolsConveyor Belts / BeltingVulcanizing PressesDistributor OpportunitiesConveyor Belts / Belting1-800-977-5423Fusion Systems
Omega
Guide to designing your Omega Press
The Omega Press is made up of what we refer to as elements. Each element consists of and upper and lower section. Each section is 10" wide, contains an air bag, and a heating element. The desired splice length is achieved by joining an adequate number of elements together in parallel position. This flexibility of design allows for the minimum weight in each element to provide easy portability, and maximum customization when determining your specific splice area requirements.
  • Capable of pressures up to 170 PSI
  • Up to FOUR elements can be operated through one control box.
  • Each control box regulates the air pressure, temperature, and activates the water-cooling process at the completion of each splice.
  • Temperature Range is from 122°F to 488°F
  • Available in a Rectangular Model or on a 22° Angle
  • Manufactured in 220V Single Phase or 440V 3 Phase Construction

Heating
Plate
Max Belt
Width
Weight
(kg)
Height
Upper
Part
Height
Lower
Part
Request
Product Code
in
in
Upper
Lower
Total
in
in
For Quote
OMEGA AL 600 31” x 10” 24” 40 40 80 4,9” 4,9”
OMEGA AL 800 40” x 10” 32” 50 50 100 6,1” 6,1”
OMEGA AL 1000 48” x 10” 40” 65 65 130 6,1” 6,1”
OMEGA AL 1200 56” x 10” 48” 76 76 152 7,3” 7,3”
OMEGA AL 1400 64” x 10” 56” 107 107 214 8,9” 8,9”
OMEGA AL 1600 72” x 10” 64” 125 125 250 10,4” 10,4”
OMEGA AL 1800 80” x 10” 72” 137 137 274 12,0” 12,0”
OMEGA AL 2000 88” x 10” 80” 155 155 310 12,8” 12,8”
OMEGA AL 2200 97” x 10” 88” 177 177 355 13,4” 13,4”

©2003 Fusion Systems, Incorporated. All Rights Reserved.